The Saiken pumps is specially developed for the production of high-viscosity rubber. The internal and external rotors and key parts of the pump body are finished by the German DMG machining center. The machining precision is high and the interchangeability is strong. The inner and outer rotors pass through the vacuum. The furnace glow plasma is nitrided for 48 hours, and the nitride layer reaches 1.2mm, which greatly improves the surface hardness, enhances the wear resistance and prolongs the service life.
The Indonesian purchase of NYP160, NYP220, NYP320 high-viscosity rotor pumps, a total of 15 sets, used to transport sealant, polyurethane foam, nail-free glue, glass glue base and 107 glue, good use, stable operation, Increased production efficiency and reduced production costs.
NYP111 high-viscosity rotor pumps, Capacity: 18 m³/h, Pressure: 1 Mpa,Caliber: 3 inch, Speed: 305 rpm, Motor: 15KW, 380V/50hz/3ph 3000 cst
NYP220 high-viscosity rotor pumps, Capacity: 30 m³/h, Pressure: 0.8 Mpa,Caliber: 5 inch, Speed: 228 rpm, Motor: 18.5KW, 380V/50hz/3ph 3000 cst
NYP320 high-viscosity rotor pumps, Capacity: 16 m³/h, Pressure: 0.6 Mpa,Caliber: 5 inch, Speed: 85 rpm, Motor: 18.5KW, 380V/50hz/3ph 200000 cst