+86-317-8227664
Annie@saikenpumps.com
The high viscosity gear pump was stuck in a short time after running. After investigation, the residual welding slag in the pipeline was sucked into the high viscosity gear oil pump, causing the inner and outer rotors to jam. It is recommended that the user need to thoroughly clean the purge pipe before installing the SS high viscosity gear pump, so as to effectively avoid the high-viscosity gear pump from getting stuck due to inhalation of welding slag or other dirt. The medium delivered by the high-viscosity gear pump should be free of hard impurities, and a filter should be installed at the entrance of the high-viscosity gear pump. In the event of failure or cleaning, to ensure that the system continues to work, a bypass device should be installed. High-viscosity gear pumps can be used to transport organic acids, fatty acids, alkaline substances, caustic soda, soda, polymers, soap, shampoo, animal fat, vegetable oil, chocolate and other special fluids.
+8617731766260/15094407290
+86-317-8227664
+8615094407290