+86-317-8227664
Annie@saikenpumps.com
What is the difference between a gear pump and a stainless steel gear pump? The working principle is the same, and the efficiency achieved is similar. But otherwise, the working principle of the gear pump is the same as the SUS gear pump, but there is a big difference in material selection and work efficiency!
Stainless steel gear pump pump body, bearing seat, etc. are made of 304 stainless steel castings, gears are made of high-quality stainless steel materials, and can also be made of copper materials or cast steel materials according to the special needs of users. There is a stuffing box chamber on the bearing seat, which acts as an axial seal.
Stainless steel gear pump pump body, bearing seat, etc. are made of 304 stainless steel castings, gears are made of high-quality stainless steel materials, and can also be made of copper materials or cast steel materials according to the special needs of users. There is a stuffing box chamber on the bearing seat, which acts as an axial seal. KCB-300～960 type pump adopts mechanical tight device, and the bearing adopts single row radial ball bearing. The stainless steel gear pump is composed of three oil-resistant rubber rings and a stop ring in the middle lining. The two nuts on the compression cover are adjusted to adjust the degree of sealing. The bearings are copper-based powder oil-impregnated bearings. In addition, stainless steel gear pumps can use packing seals with flexible graphite with good elasticity, high temperature and low temperature resistance, stable chemical properties and self-lubricating properties as packing.
Stainless steel gear pump products are sold all over the country, with excellent workmanship, and are widely used in petroleum, chemical, oil, food, pharmaceutical, rubber, plastic, textile, printing and dyeing, synthetic fiber, shipbuilding, road construction, road maintenance, wood processing, engineering machinery and equipment, etc. Industry company. It is adopted by well-known enterprises and projects such as Daqing Oilfield, Zhongyuan Oilfield, Yangzi Petrochemical, Yueyang Petrochemical, Gezhouba Water Conservancy Project, Daya Bay Nuclear Power Plant, and has established long-term business cooperation relationships with many domestic design institutes!
The ordinary gear pump body, bearing seat, etc. are gray iron castings, and the gears are made of high-quality carbon steel. They are suitable for conveying heavy oil that does not contain particle fibers, is non-corrosive, and has a temperature not higher than 200°C and a viscosity not greater than 1500 CST. Diesel, machine oil, and other liquids with similar properties.
Stainless steel gear pump manufacturers and suppliers
+8617731766260/15094407290
+86-317-8227664
+8615094407290