+86-317-8227664
Annie@saikenpumps.com
Stable flow: The flow rate of a high viscosity pump is proportional to the gear speed, and has nothing to do with pressure
Smooth flow: no pulsation and pressure peaks, no pipe vibration.
Multifunctionality: Just by adjusting the position of the rotor shaft, the same pump can produce both diluted solution and high viscosity liquids such as asphalt, syrup, resin, and polymer.
Reversibility: The liquid can flow in the reverse direction by changing the rotation direction of the gear, and the performance of the pump can be fully exerted in both directions
Self-priming: The high-viscosity pump generates high vacuum, allowing rapid self-priming at the maximum self-priming height, depending on the physical properties of the pumped liquid (temperature, vapor pressure, viscosity, etc.).
Suggestion: There are only two moving parts: driving wheel and driving wheel, and only one shaft seal.
Robust heavy-duty structure: low speed. The outer housing of the extra-large ball bearing can bear axial and radial loads.
Low wear rate: Because the driving wheel and the driven gear are not in multiples. This means that wear can be evenly distributed on each gear. Because each gear on one gear contacts each gear on the other gear the same number of times.
Wear adjustment system: The wear on the edge of the rotor can be compensated by adjusting the position of the rotor shaft. In this way, even in the case of considerable wear, the stability of the pump can be guaranteed.
The first choice of NYP high viscosity rotor pump is Saiken Pump
saiken pump industry strives for perfection and implements every component, and strives to be exquisite
Saiken Pump Industry China's oil pump manufacturer and supplier
+8617731766260/15094407290
+86-317-8227664
+8615094407290