• google+
  • facebook
  • twitter
  • linkedin
  • youtube
language

+86-317-8227664+86-317-8227664

Annie@saikenpumps.comAnnie@saikenpumps.com
Causes and solutions of KCB-type gear oil pumps not turning

2020-07-15

 
 
The material transported by the KCB gear oil pump has large impurities and the gear is stuck (generally, the welding slag is not cleaned after the pipeline is welded; the temperature is too high when the clearance of the KCB gear oil pump is too small, the gear and gear of the SS KCB gear oil pumps are too high Explosion; the shaft and bearing sleeve of the SS KCB gear oil pump exploded.
  Remedy: disassemble the pipeline and take out the foreign body; slowly turn (turn) the tool forward and reverse with a tool, easily move the bolt at one end of the pump, and adjust the end cap of the KCB gear oil pump according to the tightness of the rotating coupling The tightness of the screw. Note: When the pump is started, it is best to use a hand truck to fill it with a little lubricant.

   

the professional team to service !

    If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!