+86-317-8227664
Annie@saikenpumps.com
1. Shutdown: Block the power supply. Empty the liquid in the stainless steel gear pump, clean it and rotate the impeller 180 degrees regularly to avoid shaft deformation until the oil pump is completely cooled and stopped.
2. SS gear oil pumps should not be operated continuously below 30% of the planned flow rate.If it is necessary to operate under these conditions, a bypass pipe should be installed at the outlet and the flow rate should reach the above minimum value.
3.Often check the looseness of the anchor bolts of the stainless steel gear oil pumps, whether the temperature of the pump casing of the heat transfer oil pump and the inlet temperature are common, the shaking state of the outlet pressure gauge and the oscillation state of the pump.
4. Pay attention to the noise of SS gear pumps operation. If any abnormal conditions are found, they should be dealt with in time.
+8617731766260/15094407290
+86-317-8227664
+8615094407290