+86-317-8227664
Annie@saikenpumps.com
The main flow parts of the heat preservation asphalt pump are equipped with a hollow sandwich, and are equipped with steam, heat/hot water, heat transfer oil, etc. to heat the conveying liquid and the pump, and heat preservation. It should be used when the conveying viscosity is large. Transmission methods such as reducer, speed-regulating motor or belt pulley reduce the speed of the stainless steel heat preservation asphalt pump.
The material of the SS heat preservation asphalt pump is divided into two types according to the working temperature. The type I material HT200 asphalt thermal insulation pump is suitable for conveying below 200℃, and the type II material Q235 SUS heat preservation asphalt pump is suitable for conveying the non-corrosive below 350℃ and does not contain solid particles. Heavy oil/asphalt, etc. where there is solidification at room temperature, and where insulation is required during outdoor installation and process in high-cold areas.
+8617731766260/15094407290
+86-317-8227664
+8615094407290