+86-317-8227664
Annie@saikenpumps.com
The input power of the stainless steel gear pump may exceed the rated power of the motor and cause the motor to be overloaded and burned. When the motor is overloaded, either the maintenance system fails to burn the motor; or the maintenance system acts to stop the SS gear pumps from rotating. When the flow exceeds the design condition point flow and reaches a certain value. The power always increases as the flow rate increases. In the general SS gear oil pump, the power curve is a curve that rises with the increase of the flow rate, which will bring a problem to the use of the stainless steel gear pump: when the stainless steel gear pump is operated at the design working point, in general, The power of the SS gear oil pumps is less than the rated power of the motor. The use of this stainless steel gear pump is normal; but when the head of the stainless steel gear pump is reduced, the flow rate will increase and the power will also increase. More ideally, when the flow increases to a certain value, the so-called full-lift characteristic means that the power curve rises very slowly with increasing flow. Not only will the power not increase, but it will decrease.
+8617731766260/15094407290
+86-317-8227664
+8615094407290