+86-317-8227664
Annie@saikenpumps.com
Stainless steel high-viscosity gear pumps often get stuck and hold the shaft fixed during operation. The main reason is that stainless steel high-viscosity gear pumps often transport high-viscosity media, and some impurities are mixed in the physics. If there is no proper filter installed at the inlet of the pump Then, once the large hard particles enter the pump cavity, it will bring the high-viscosity pump rotor stuck inside and outside, making the pump unable to rotate, which will seriously damage the stainless steel high-viscosity gear pump inside and outside the rotor.
It is recommended that when installing a stainless steel high-viscosity gear oil pump, choose a suitable filter to install the pump inlet. The coefficient of thermal expansion is large, once the temperature of the pump is too high, it will cause the gap between the pump internals and pipe fittings to narrow, to a certain extent. There is a lockup phenomenon.
Therefore, choose a high viscosity stainless steelgear pump to determine the specific temperature and lubricity of the medium. The viscosity of the medium is closely related to the speed of the high viscosity SS gear pump. If the medium viscosity of the high viscosity stainless steel gear pump is too high, the pump speed is too high High, the pump flow is low, and the pump noise is large.
+8617731766260/15094407290
+86-317-8227664
+8615094407290