+86-317-8227664
Annie@saikenpumps.com
1. Interference occurs in the rotating part of the stainless steel gear pump, remove it for inspection and eliminate the fault;
2. The viscosity of stainless steel suction liquid is too large.
3. The suction height of the stainless steel gear oil pump exceeds the rated weight to increase the suction liquid level;
4. The suction pipe or filter is blocked, and the SS gear oil pump eliminates the dirt on the filter;
5. The suction pipe of the stainless steel gear pump extends into the liquid surface shallowly, and the suction pipe should extend into the liquid pool about deep;
6. The air enters the pipeline, and the stainless steel gear pump checks each connection to make it sealed;
7. The resistance of the discharge pipe of the stainless steel gear pump is too large, check whether the discharge pipe and valve are blocked;
8. The gear bearing or side plate is seriously worn, the stainless steel gear pump is removed for cleaning, and the defect or repair is repaired.
+8617731766260/15094407290
+86-317-8227664
+8615094407290