The high-viscosity gear pump was stuck in a short time after running. After investigation, the residual welding slag in the pipeline was sucked into the high-viscosity gear pump, causing the inner and outer rotors to jam. It is recommended...
China Food Grade Lobe Pumps for Chocolate,Food Grade Lobe Pumps manufacturer! Suitable for high viscosity liquids,quality assurance and best price!...
read moreThere are many differences between lobe pumps and gear pumps: 1. Volume: Due to its compact design, the lobe lobe pump requires a small footprint. No additional space is required to service the pump. Standard flange, diameter can be adjuste...
The high-viscosity gear pump was stuck in a short time after running. After investigation, the residual welding slag in the pipeline was sucked into the high-viscosity gear pump, causing the inner and outer rotors to jam. It is recommended...
High viscosity gear pump s are used to transport pure fluids with a certain viscosity. They can be used to transport oils such as lubricating oil, crude oil, etc.; they can also be used to transport rubber, asphalt, paint, adhesives, dyes,...
The following items should be considered when high viscosity gear pump s deliver medium with relatively high viscosity, and the working conditions should be described in as much detail as possible. 1. For high-viscosity media, when choosing...
1. The operating direction of the heat preservation asphalt pump must be determined before starting up, and it must not be reversed. 2. It is strictly forbidden to run the thermal insulation asphalt pump without any medium to avoid damage t...
The main flow parts of the heat preservation asphalt pump are equipped with a hollow sandwich, and are equipped with steam, heat/hot water, heat transfer oil, etc. to heat the conveying liquid and the pump, and heat preservation. It should...
The heat preservation asphalt pump belongs to NYP high viscosity pump . It adopts the internal meshing principle. The structure adopts the internal and external gear pitch circle close to one side, and the other side is separated by the cre...
Before starting the newly installed KCB gear oil pump , perform a static pressure test to check whether the mechanical seal is leaking. If there are too many leaks, find out the cause and try to eliminate it. If it is still invalid, the SS...
1. The sealing condition of KCB gear oil pump should be checked frequently. During operation, when the leakage exceeds the standard, the heavy oil is more than 5 drops/min, and the light oil is not more than 10 drops/min. If there is no imp...