It is very important to preheat the KCB gear pump before delivering high temperature medium. The advantage of preheating the KCB gear oil pump in advance can avoid high temperature impact and damage to the components. It is recommended to p...

The speed of the stainless steel gear pump mainly depends on the process fluid. If the oil is transferred, the pump can rotate at a very high speed, but when the fluid is a high-viscosity polymer melt, this limitation will be large reduce....

1. Before starting the stainless steel gear pump , check whether the corner bolts, pipelines and flanges are loose, whether the valve switch is flexible, check whether the electrical wiring is loose, whether the on-site and remote transmiss...

The input power of the stainless steel gear pump may exceed the rated power of the motor and cause the motor to be overloaded and burned. When the motor is overloaded, either the maintenance system fails to burn the motor; or the maintenanc...

Several main parts of the stainless steel gear pump during disassembly and maintenance: rolling bearing: when the stainless steel gear pump is operated for a long time, the bearing must be replaced when it wears to a certain extent. Front s...

KCB gear oil pumps are widely used in my country. The structure and design are the products introduced from the Soviet Union in the early 1950s. They have the characteristics of simple structure, practicality, convenient use and maintenance...

1. Shutdown: Block the power supply. Empty the liquid in the stainless steel gear pump , clean it and rotate the impeller 180 degrees regularly to avoid shaft deformation until the oil pump is completely cooled and stopped. 2. SS gear oil p...

The material transported by the KCB gear oil pump has large impurities and the gear is stuck (generally, the welding slag is not cleaned after the pipeline is welded; the temperature is too high when the clearance of the KCB gear oil pump i...