Calculation of gear oil pump flow and flow formula Flow of gear oil pump 1. In theory, the volume of oil brought to the discharge cavity should be equal to the working volume between teeth 2. The Qt per revolution should be the sum of the w...

As the seasons change, the temperature is getting lower and lower in winter, especially in the north. The viscosity of some materials is increasing at ambient temperature, and the flow rate of the pump may not meet the desired demand. The H...

The high-viscosity pump has the characteristics of simple structure, easy maintenance and maintenance, safe and reliable use, and is composed of main parts such as the pump body, pump cover, gear, shaft end seal, etc. The high-viscosity pum...

Before starting operation, fill the housing of the high-viscosity pump with the liquid to be transported to facilitate safe start-up. If the ambient temperature is lower than the freezing point, hot steam should be introduced into the pump...

High-viscosity gear pump s have different materials and structures. According to different structures, they have good use value and role in application, and are used in different fields. The support or flange of the high-viscosity gear pump...

Phenomenon that needs attention in the process of high viscosity pump conveying high viscosity liquid 1. No outlet pressure or lack of pressure in high viscosity pump High-viscosity pumps cannot generate pressure, they just output flow. Low...

Friends of over-high-viscosity pumps in households must know that when the high-viscosity pump starts to run, fill the casing of the high-viscosity pump with the liquid to be transported, which is easy to start. If the ambient temperature i...

High-viscosity pumps are often used in the long-term continuous work of the lubrication system of large mechanical equipment. Due to the independent lubrication of the pump bearings, the high-viscosity pump s have good adaptability to some...