The gears and shafts of high-viscosity pumps are made into one body, and their rigidity and reliability are higher than those of high viscosity pump s manufactured separately from gears and shafts. The gears of low-pressure high-viscosity p...

The 4 common methods of maintaining the KCB gear oil pump are as follows: 1. Note that the KCB gear oil pump should be kept in a dry, clean and free of corrosive gas. 2. The KCB gear oil pump is frequently inspected and maintained, and the...

The following items should be checked for the first start-up after installation of the high-viscosity gear pump : ① Whether the valves on the inlet and outlet pipes are open; ②Whether the direction of the pump is correct (the pump is cl...

Gear oil pump performance curve and data include: total head, efficiency, shaft power and speed and correction calculation, make H-Q, P-Q, curve vibration and temperature rise; noise measurement; NPSH test; Mechanical operation test of gear...

The displacement of the high-viscosity rotor pump cannot be adjusted arbitrarily, which limits the application space of the high-viscosity rotor pump to a large extent. In recent years, with the development trend of high-viscosity rotor pumps, it has ...

High-viscosity gear pump conveys high-viscosity materials such as high-viscosity resin, polyurethane, Poly mystery, polyethylene, etc.; it is especially suitable for the conveyance of high-viscosity and consistency media; the pump head, pump housing, ...

Stainless steel high-viscosity gear pumps often get stuck and the shaft is fixed during operation. The main reason is that stainless steel high-viscosity gear pumps often transport high-viscosity media, and some impurities are mixed in the physics. If...

When NYP high-viscosity rotor pumps transport high-viscosity media, it is often necessary to reduce the use of speed or manual speed and automatic speed control to control the actual flow of NYP high-viscosity rotor pumps to meet the produc...